WIDTH 120 / 140 / 160 / 180 cm DEPTH 142 cm HEIGHT 75 cm MATERIAL The top plate consists of 18 mm E1 norm melamine coated chipboard. The edges of the 18 mm E1 norm melamine coated chipboards used are covered with 1 mm impact-preventing Poly-Vinly-Chlorid (PVC). There are 4 pieces of 20 x 40 x 1.50 mm thick metal profiles under the table for support and design. Connection parts are welded to both sides of these profiles with a special laser cut of 4 mm thickness. FOOT MATERIAL The feet are made of DKP sheet with a thickness of 1.50 mm; Starting from 70 mm from the upper side and tapering to 41 mm from the lower side, the inner sheet is made of 1.20 mm thick DKP sheet; It consists of special laser cut press bending sheet starting from 46 mm and tapering to 27 mm. 30 x 40 x 1.20 mm thick metal profiles are welded to each other, including the feet, after angled cuts are made to prevent stretching between the feet. There are plug-in wedges pressed with plastic injection in a special mold under the table legs.
All information and images published on this site have been obtained by the advertiser. And the possibility of errors in the information or images provided by the advertiser or during the entry of information to the site is contained. Therefore, the company (Qsale Trading Online) and through its website (Qsale) does not assume any responsibility or bear the results of this information or images, and stresses the need to verify the declared purposes personally and to carry out the examination before purchasing.
