Contractors can take this portable rebar bender and cutter combination machine to the jobsite. At just 180 pounds it can be picked up and carried by two people. Both cut and bend up to and including 3/4" (#6) grade 60 rebar. Just plug it into a standard 110-volt outlet or 5000 watt generator. Set the FS-600 on the ground next to your pile of rebar or up on a bench or table. The bending angle is adjusted with a simple control knob. Once set the bends will be uniform and accurate. A push button control on the machine is safe and easy to use. NOTE: Pictures show an optional foot pedal control and optional reference fence attachment that can be ordered separately. Plug in the foot pedal control so both hands are free to guide the rebar. Add the reference fence attachment for an easy to use adjustable material stop up to 4 feet.
All information and images published on this site have been obtained by the advertiser. And the possibility of errors in the information or images provided by the advertiser or during the entry of information to the site is contained. Therefore, the company (Qsale Trading Online) and through its website (Qsale) does not assume any responsibility or bear the results of this information or images, and stresses the need to verify the declared purposes personally and to carry out the examination before purchasing.