Sakamura BPF-560 UL 6-Station 5-Die Cold Former, S/N NA, Heading Stage Number: 5-Stages (Cutting/Pusher Process Not Included), Nominal Pressure: 270,000-kgF (8MM Before Beating Point), Each Process (Max): 170,000-kgF, Continuous Work Energy: ABT. 16,00- kgM, Cutting Wire Diameter: 14.5 to 30mm (Material Tensile Strength: 55-kgF/mm² or Less), Cutting Load (Max): 32,000-kgF, Cutting Length: 20 to 200mm, Cutting System: Bush Cutter w/ Pusher Device, Cutting Speed: 0.63-M/Sec (@ 60-SPM), Stroke: 60-SPM (Note: Production Speed Decrease Rate 5% or Less; 50-SPM Pulley Attached), Knife Edge Size: 80 x 37(T)mm, Quill Size: 75 x 100(T)mm, Punch Size: 95.25 x 290(T)mm, Die Size: 139.7 x 300(T)mm, Die Center: 168mm, Die Block Thickness: 320mm, K.O. Amount: 30 to 210mm, K.O. Capacity (Max): 27,000-kgF, P.K.O. Amount: 110mm (Service: 130mm) – Individual Lever Type; 53mm (Service: 63mm), P.K.O. Capacity (Max): 13,500-kgF, Ram Stroke: 450mm, Main Motor: AC 90-kW(6P/480V/60HZ) TEFC Type, Multi-Plate Air Clutch, Air Consumption: 4.0/Jog, Air Pressure: 5-kgF/cm², Cartridge Open Spring Chuck Transfer System, Pumps: 1.5-kW (Coolant Oil); 0.75-kW (Lube Oil), Machine Weight (Approx): 73,000-kG
All information and images published on this site have been obtained by the advertiser. And the possibility of errors in the information or images provided by the advertiser or during the entry of information to the site is contained. Therefore, the company (Qsale Trading Online) and through its website (Qsale) does not assume any responsibility or bear the results of this information or images, and stresses the need to verify the declared purposes personally and to carry out the examination before purchasing.
