Description Hardware system to install a sliding door. Rail and bearings from which a sliding door hangs, which slides along the rail. Ideal for installing sliding doors, where it is not possible to install traditional folding doors, for a matter of space, or for aesthetic reasons. The kit includes all the necessary parts to install the sliding door (the door is not included). Specifications Kit for the installation of a sliding door. Model with visible fittings. 70 mm diameter two-wheel system. Color matte steel. Rail 2m long (it is divided into two parts that fit). Bearing system that slides along the rail, smoothly and reliably. Compatible with wooden doors width 35-40 mm and maximum weight of 110 Kg. The wheel is fixed to the door at the top, using screws. Guide is provided to install optionally on the floor. Avoid the swinging of the door in suspension. To install this guide, the door has to have a linear groove in the lower part of 7 x 20 mm (width x height). All parts are supplied, disassembled, together with a very clear and graphic installation manual. Total sizeof all the rail, with fittings and wooden perimeter: 200 x 6.5 x 11.5 cm.
All information and images published on this site have been obtained by the advertiser. And the possibility of errors in the information or images provided by the advertiser or during the entry of information to the site is contained. Therefore, the company (Qsale Trading Online) and through its website (Qsale) does not assume any responsibility or bear the results of this information or images, and stresses the need to verify the declared purposes personally and to carry out the examination before purchasing.
